Since gas prices continue to increase, increasing the efficiency of your vehicle is the most effective method to safeguard your pocketbook. Here are some ways How to Increase Car fuel Average? by boosting your vehicle’s efficiency when using it.
What is fuel efficiency?
The term “fuel efficiency” is often used in the automotive industry. It generally refers to the capability of a vehicle’s engine to pull enough power from the fuel.
Vehicles capable of obtaining more energy from fuel are deemed to be efficient in their use of fuel. Investing in vehicles that are fuel-efficient always proves to be worth the investment.
How to Increase Car fuel Average?
Adjust the car tires at the right pressure.
Properly inflated tires will reduce the fuel consumed by up to 3 percent. Your tires also lose approximately 1 PSI each month. Additionally, when they have a cold temperature (e.g., during the winter), their pressure decreases due to the thermal expansion that the air undergoes.
It is recommended that you check your tires every month at the very least weekly. A properly inflated tire can also prevent unbalanced wear to the tread.
Some fuel stations are equipped with automatic air compressors that shut off at an arbitrary level. (For security reasons, double-check the pressure using the gauge you have at home, particularly when someone else suggests you add a shockingly large quantity of air.)
Small permanently-installed valve-stem extensions can allow filling without removing the caps, but check that they are not prone to jamming with foreign matter and leaking.
The suggested inflation pressures are only for cold tires. It is advised to pump them early in the morning, or if you’ve driven less than two miles, so the reading is accurate.
If you’ve driven around for a while, or it’s hot outside, you should add 3 PSI. Inflate the tire to the pressure recommended by your car’s owner’s manual or the sticker on your driver’s doorpost. Note that the number stamped on the tire indicates the highest tire pressure, not the recommended one.
Tune your engine
A properly tuned engine will increase its power and dramatically improve fuel efficiency. Be aware that some tuners remove efficiency measures when tuning to increase power.
Make sure you keep good spark plugs in your engine. Changing the oil every 4 hours, changing the oil at a regular interval, making sure that the air filter is clean, and so on.
The Tanking-Up Process = Weight Gain
One Litre of Fuel equals I Kilograms of added weight, and more weight means more fuel burned(no need for rockets here)
When filling up your fuel, fill it halfway and keep your tank over one-quarter full. The downside of this practice is that if the fuel levels are low, you may stress your vehicle’s fuel pump more. However, having a half-full tank could increase the mileage of your car. Anything that is 20 miles per gallon.
Make your driving efficient, reduce expenses for fuel, and help the environment. These tips may seem too extreme (even impossible for certain), but you must take the necessary steps to reach 20 miles per gallon!
P.S. The author is a petrol nut and generally doesn’t worry much about fuel efficiency. He can be patient and efficient when he needs to, like when writing this lengthy piece.
Still not getting 20kmpl? Sell your car for the most affordable price to the best price to CARS24!
Concentrate on your driving style
The force you exert on your pedal will increase your fuel consumption. That you use and your driving habits are directly linked to the efficiency of your vehicle.
Expert on fuel economy Helen Taylor suggests drivers pay attention to how smoothly they drive to decrease the amount of fuel used.
“Driving smoothly is vitally important. Avoid excessive acceleration and overbaking since you’d like to use less energy,” she adds.
Acceleration gradually and braking quickly (where possible) are two strategies that will help you save on petrol. If you’re driving an automatic car, ensure you’re in the right gear and avoid retaining high revs for long periods.
Reduce your burden.
Get the most lightweight car that can meet your requirements. Weight is among the most significant causes of loss of kinetic energy when driving non-hybrid vehicles.
If you’re not in the market for cars, you should take the extra weight off of the car you’re currently driving. If seats aren’t used can be removed, remove them. If you are using your trunk as a storage place for bulky items, you should find a new place for the things.
The extra 100 pounds increase the consumption of your vehicle by about 2%. (Weight is crucial when driving stop-and-go. In most highway driving, weight matters very little.
Once the car is at its speed, it is only required to move air out of its way.) Do not take things out of inside the car that you frequently use and instead ensure you have them in your car and easily accessible since unnecessary trips to retrieve or replace them could be far more expensive than a few miles less.
Choose the smallest possible tires for your car that will meet your driving style and needs.
Narrow tires have a lower frontal area and thus reduce aerodynamic drag. Be aware, however, that narrow tires offer less traction, too (which is the reason race cars come with such large tires). Don’t buy the wrong tire for your tires (use the same size tires as the vehicle). Also, don’t purchase smaller wheels unless the manufacturer has approved.
Select low-rolling-resistance compound tires
These can increase fuel economy by a few percent. However, the improvement isn’t significant or an alternative to the proper inflation. It’s not wise to replace the tires of the previous tire with new ones before they become exhausted.
Take into consideration other transportation options
Reducing your dependence on using your car isn’t just an excellent method to reduce your fuel consumption. It could be very liberating and a boon for your overall health. It also allows you to cut down on other costs, like parking.
If you’re planning to reduce time spent in the car, It’s worth looking into:
- Going between the grocery store and home, If you’re only looking for only a couple of things
- Make use of the lockers and showers at the office and bicycle to work
- Make sure you share the driving duties with local colleagues or friends and carpool your most frequent journeys.
Calculate the Fuel Average Accurately
A lot of people are aware of how to calculate the fuel average. However, some make the mistake of doing it wrong. This is the correct method to determine the fuel efficiency of automobiles.
- Fill the tank up to the maximum.
- Keep track of your distance (reading on the Odometer) and reset your trip meter.
- When you next visit the station for petrol, make sure you fill your tank to the maximum (at the same amount that you did before).
- Take note of your number (km) in the trip meter. You can also subtract the reading of the last measurement (km).
- Be aware of the number of Liters.
- Divide the number of miles by the liters of fuel you bought (km/l).
- You’ll see kilometers per liter of your car from the tank refill.
Avoiding bumps and rough roads will also help save fuel since rough roads cause more friction for the tires. This means that the engine needs more fuel to keep its speed. A smoother and more pliable road is a good option for those thinking about increasing their miles.
How to reduce the amount of fuel consumed by the car is a common topic. It is, however, more crucial now that the price of petrol is high. One thing to remember is to be aware of the different strategies included in this article. These tips can help you achieve the most fuel efficiency out of your car.
Why do cars consume more fuel at higher speeds?
Speeding up increases fuel consumption and reduces fuel efficiency because of the resistance to rolling tires in addition to the resistance to air.
Although vehicles can achieve their maximum fuel efficiency at various speeds, the gas mileage typically declines dramatically at speeds of more than 50 miles/hour (mph).
What are the standards for a fuel-efficient vehicle?
The majority of cars aren’t fuel-efficient. Some guidelines define what constitutes a vehicle that is efficient in fuel use. In the ideal scenario, a car can be labeled as efficient if it consumes less than 6 liters of fuel every 100 kilometers.
These fuel-efficient vehicles are Suzuki Alto, Suzuki WagonR, and Suzuki Cultus.
|What makes up the cost of fuel?||Percentage|
|Cost of petrol to the supplier||33%|
|VAT||17% (VAT is charged at 20% but makes up 17% of the cost of fuel)|
|Cost of biofuel content (for example E10)||7%|
|Supply and delivery||1%|
All the models featured offer fantastic fuel efficiency.
How Do You Determine the amount of fuel you use
You’ll never know whether your new driving style and abilities are working until you know your car’s mileage per gallon (mpg). Certain cars are equipped with computers, but they’re not always reliable.
When you are filling up your car, then fill it up until it is full and then take note of:
- The mileage you’ve accumulated since the last time you filled it up
- The volume of fuel you use
- The price per liter of fuel
Make use of the calculator for fuel consumption in the following:
- or, to figure it out by yourself:
- Tank up until it reaches the top
- Zero the counter for trips
- The next time you refill, take note of the distance you traveled
- Refill the tank and take note of the number of litres that are that you have put in
- Divide the kilometers driven per liter of gasoline consumed by Liters (miles per liter)
- To convert the figure into miles per gallon, multiply it by 4.544